ReconfigureOnChangeFilter does not reuse context properties?
Hi I'm using a config file wich looks like this: <?xml version="1.0" encoding="UTF-8"?> <configuration scan="true" scanPeriod="60 seconds" > <appender name="cms" class="ch.qos.logback.core.FileAppender"> <file>${pathToLogs}mysign-cms.log</file> <Append>false</Append> <encoder> <pattern>%d %30.30t %-5p %45.45c - %m%n</pattern> </encoder> </appender> <appender name="R" class="ch.qos.logback.core.FileAppender"> <file>${pathToLogs}log.log</file> <Append>false</Append> <encoder> <pattern>%d %30.30t %-5p %45.45c - %m%n</pattern> </encoder> </appender> <logger name="ch.mysign" additivity="false" level="INFO"> <appender-ref ref="cms"/> </logger> <root level="WARN"> <appender-ref ref="R"/> </root> </configuration> The parameter ${pathToLogs} comes from the following code: LoggerContext context = (LoggerContext) LoggerFactory.getILoggerFactory(); try { JoranConfigurator configurator = new JoranConfigurator(); configurator.setContext( context ); context.reset(); context.putProperty( "pathToLog", "my-path-to-the-external-logs" ); configurator.doConfigure("my-logback-config.xml" ); } catch ( JoranException je ) { System.out.println( je.getMessage() ); } If I change the config file, the property "pathToLog" gets lost. Is this the same issue as descibed in [1]? If yes, is it a problem to reuse the context or at least the properties of the old context? [1] http://jira.qos.ch/browse/LOGBACK-592 best regards Mike
I've not hit this problem before because I just used system properties to pass info into the logging setup. Is there some reason why you can't use system properties? David
On 9 Jan 2014, at 08:59, Mike Müller <mikedev@mysign.ch> wrote:
Hi
I'm using a config file wich looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<configuration scan="true" scanPeriod="60 seconds" > <appender name="cms" class="ch.qos.logback.core.FileAppender"> <file>${pathToLogs}mysign-cms.log</file> <Append>false</Append> <encoder> <pattern>%d %30.30t %-5p %45.45c - %m%n</pattern> </encoder> </appender> <appender name="R" class="ch.qos.logback.core.FileAppender"> <file>${pathToLogs}log.log</file> <Append>false</Append> <encoder> <pattern>%d %30.30t %-5p %45.45c - %m%n</pattern> </encoder> </appender> <logger name="ch.mysign" additivity="false" level="INFO"> <appender-ref ref="cms"/> </logger> <root level="WARN"> <appender-ref ref="R"/> </root> </configuration>
The parameter ${pathToLogs} comes from the following code:
LoggerContext context = (LoggerContext) LoggerFactory.getILoggerFactory();
try { JoranConfigurator configurator = new JoranConfigurator(); configurator.setContext( context ); context.reset(); context.putProperty( "pathToLog", "my-path-to-the-external-logs" ); configurator.doConfigure("my-logback-config.xml" ); } catch ( JoranException je ) { System.out.println( je.getMessage() ); }
If I change the config file, the property "pathToLog" gets lost. Is this the same issue as descibed in [1]? If yes, is it a problem to reuse the context or at least the properties of the old context?
[1] http://jira.qos.ch/browse/LOGBACK-592
best regards Mike _______________________________________________ Logback-user mailing list Logback-user@qos.ch http://mailman.qos.ch/mailman/listinfo/logback-user
Yes, there are different systems with the same configuration running on the same server. Each system gets the path derived from the path where the app is installed. So system properties are not a solution. best regards mike
-----Original Message----- From: Logback-user [mailto:logback-user-bounces@qos.ch] On Behalf Of David Roussel Sent: Thursday, January 09, 2014 10:34 AM To: logback users list Cc: logback-user@qos.ch Subject: Re: [logback-user] ReconfigureOnChangeFilter does not reuse context properties?
I've not hit this problem before because I just used system properties to pass info into the logging setup.
Is there some reason why you can't use system properties?
David
On 9 Jan 2014, at 08:59, Mike Müller <mikedev@mysign.ch> wrote:
Hi
I'm using a config file wich looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<configuration scan="true" scanPeriod="60 seconds" > <appender name="cms" class="ch.qos.logback.core.FileAppender"> <file>${pathToLogs}mysign-cms.log</file> <Append>false</Append> <encoder> <pattern>%d %30.30t %-5p %45.45c - %m%n</pattern> </encoder> </appender> <appender name="R" class="ch.qos.logback.core.FileAppender"> <file>${pathToLogs}log.log</file> <Append>false</Append> <encoder> <pattern>%d %30.30t %-5p %45.45c - %m%n</pattern> </encoder> </appender> <logger name="ch.mysign" additivity="false" level="INFO"> <appender-ref ref="cms"/> </logger> <root level="WARN"> <appender-ref ref="R"/> </root> </configuration>
The parameter ${pathToLogs} comes from the following code:
LoggerContext context = (LoggerContext) LoggerFactory.getILoggerFactory();
try { JoranConfigurator configurator = new JoranConfigurator(); configurator.setContext( context ); context.reset(); context.putProperty( "pathToLog", "my-path-to-the-external-logs" ); configurator.doConfigure("my-logback-config.xml" ); } catch ( JoranException je ) { System.out.println( je.getMessage() ); }
If I change the config file, the property "pathToLog" gets lost. Is this the same issue as descibed in [1]? If yes, is it a problem to reuse the context or at least the properties of the old context?
[1] http://jira.qos.ch/browse/LOGBACK-592
best regards Mike _______________________________________________ Logback-user mailing list Logback-user@qos.ch http://mailman.qos.ch/mailman/listinfo/logback-user
Logback-user mailing list Logback-user@qos.ch http://mailman.qos.ch/mailman/listinfo/logback-user
If you are in an app server you can use JNDI and get properties from there. David
On 9 Jan 2014, at 10:44, Mike Müller <mikedev@mysign.ch> wrote:
Yes, there are different systems with the same configuration running on the same server. Each system gets the path derived from the path where the app is installed. So system properties are not a solution.
best regards mike
-----Original Message----- From: Logback-user [mailto:logback-user-bounces@qos.ch] On Behalf Of David Roussel Sent: Thursday, January 09, 2014 10:34 AM To: logback users list Cc: logback-user@qos.ch Subject: Re: [logback-user] ReconfigureOnChangeFilter does not reuse context properties?
I've not hit this problem before because I just used system properties to pass info into the logging setup.
Is there some reason why you can't use system properties?
David
On 9 Jan 2014, at 08:59, Mike Müller <mikedev@mysign.ch> wrote:
Hi
I'm using a config file wich looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<configuration scan="true" scanPeriod="60 seconds" > <appender name="cms" class="ch.qos.logback.core.FileAppender"> <file>${pathToLogs}mysign-cms.log</file> <Append>false</Append> <encoder> <pattern>%d %30.30t %-5p %45.45c - %m%n</pattern> </encoder> </appender> <appender name="R" class="ch.qos.logback.core.FileAppender"> <file>${pathToLogs}log.log</file> <Append>false</Append> <encoder> <pattern>%d %30.30t %-5p %45.45c - %m%n</pattern> </encoder> </appender> <logger name="ch.mysign" additivity="false" level="INFO"> <appender-ref ref="cms"/> </logger> <root level="WARN"> <appender-ref ref="R"/> </root> </configuration>
The parameter ${pathToLogs} comes from the following code:
LoggerContext context = (LoggerContext) LoggerFactory.getILoggerFactory();
try { JoranConfigurator configurator = new JoranConfigurator(); configurator.setContext( context ); context.reset(); context.putProperty( "pathToLog", "my-path-to-the-external-logs" ); configurator.doConfigure("my-logback-config.xml" ); } catch ( JoranException je ) { System.out.println( je.getMessage() ); }
If I change the config file, the property "pathToLog" gets lost. Is this the same issue as descibed in [1]? If yes, is it a problem to reuse the context or at least the properties of the old context?
[1] http://jira.qos.ch/browse/LOGBACK-592
best regards Mike _______________________________________________ Logback-user mailing list Logback-user@qos.ch http://mailman.qos.ch/mailman/listinfo/logback-user
Logback-user mailing list Logback-user@qos.ch http://mailman.qos.ch/mailman/listinfo/logback-user
Logback-user mailing list Logback-user@qos.ch http://mailman.qos.ch/mailman/listinfo/logback-user
There's no JNDI just a plain Tomcat. The reason I use a context property is that the path to the logs must not be configured manually. The Webapp detects the path where the app is installed and sets the (logger-) context property. Which works - just till the configuration gets reloaded because the configuration file was changed (and the scan="true"). My question is, why does ReconfigureOnChangeFilter not reuse the setted context Properties? Is that by design or is it a bug? Best regards mike
-----Original Message----- From: Logback-user [mailto:logback-user-bounces@qos.ch] On Behalf Of David Roussel Sent: Thursday, January 09, 2014 3:58 PM To: logback users list Cc: logback users list Subject: Re: [logback-user] ReconfigureOnChangeFilter does not reuse context properties?
If you are in an app server you can use JNDI and get properties from there.
David
On 9 Jan 2014, at 10:44, Mike Müller <mikedev@mysign.ch> wrote:
Yes, there are different systems with the same configuration running on the same server. Each system gets the path derived from the path where the app is installed. So system properties are not a solution.
best regards mike
-----Original Message----- From: Logback-user [mailto:logback-user-bounces@qos.ch] On Behalf Of David Roussel Sent: Thursday, January 09, 2014 10:34 AM To: logback users list Cc: logback-user@qos.ch Subject: Re: [logback-user] ReconfigureOnChangeFilter does not reuse context properties?
I've not hit this problem before because I just used system properties to pass info into the logging setup.
Is there some reason why you can't use system properties?
David
On 9 Jan 2014, at 08:59, Mike Müller <mikedev@mysign.ch> wrote:
Hi
I'm using a config file wich looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<configuration scan="true" scanPeriod="60 seconds" > <appender name="cms" class="ch.qos.logback.core.FileAppender"> <file>${pathToLogs}mysign-cms.log</file> <Append>false</Append> <encoder> <pattern>%d %30.30t %-5p %45.45c - %m%n</pattern> </encoder> </appender> <appender name="R" class="ch.qos.logback.core.FileAppender"> <file>${pathToLogs}log.log</file> <Append>false</Append> <encoder> <pattern>%d %30.30t %-5p %45.45c - %m%n</pattern> </encoder> </appender> <logger name="ch.mysign" additivity="false" level="INFO"> <appender-ref ref="cms"/> </logger> <root level="WARN"> <appender-ref ref="R"/> </root> </configuration>
The parameter ${pathToLogs} comes from the following code:
LoggerContext context = (LoggerContext) LoggerFactory.getILoggerFactory();
try { JoranConfigurator configurator = new JoranConfigurator(); configurator.setContext( context ); context.reset(); context.putProperty( "pathToLog", "my-path-to-the-external-logs" ); configurator.doConfigure("my-logback-config.xml" ); } catch ( JoranException je ) { System.out.println( je.getMessage() ); }
If I change the config file, the property "pathToLog" gets lost. Is this the same issue as descibed in [1]? If yes, is it a problem to reuse the context or at least the properties of the old context?
[1] http://jira.qos.ch/browse/LOGBACK-592
best regards Mike _______________________________________________ Logback-user mailing list Logback-user@qos.ch http://mailman.qos.ch/mailman/listinfo/logback-user
Logback-user mailing list Logback-user@qos.ch http://mailman.qos.ch/mailman/listinfo/logback-user
Logback-user mailing list Logback-user@qos.ch http://mailman.qos.ch/mailman/listinfo/logback-user
Logback-user mailing list Logback-user@qos.ch http://mailman.qos.ch/mailman/listinfo/logback-user
participants (2)
-
David Roussel -
Mike Müller